Gen 1
Gen 2
Click
images for a better view
POWERHOUSE is now offering high output charging setups for both the Gen 1 and Gen 2 Busas. The components are being offered separately.
The Gen 1 and Gen 2 stators are 500W...100W more than stock. The Gen 1 stators are rewound - so we require your stator as a core; the Gen 2 stators are new, no core required.
Gen 1 stator is $255 and the Gen 2 stators are $239.95. Gen 2 regulators can be the early, or late version.
The late version is on the right in our picture.
Please specify which one you would need...
For those of you who are concerned with heat issues and/or melted regulator plugs, we are offering "plug and play" MOSFET style regulators for both the Gen 1 and Gen 2. Both versions of these regulator/rectifiers are 50 amp, and will be going for $158 each. These regulators run cooler than the old-style OEM regulators and do not melt plugs or heat up wires. We recommend these regulators with the higher output stators...
These stators are ready to be installed in the cover - the ignition trigger is wired in, the grommet for the wires where they pass through the cover is installed, and the proper plugs are on the end, ready to be plugged directly into your harness. We can also supply you will the cover gasket, if needed.
The new MOSFET regulators are $158, so a full setup for both Gens - stator and regulator - would be $413 for a Gen1 and $397.95 for a Gen2.
It should also be noted that these regulators are totally compatible with the stock charging systems on both bikes; they are "plug and play" and are a better choice than OEM . .